Archive for pallet

Microwave Cabinet – Extreme Makeover!

Posted in Creative Reuse, Tutorials with tags , , , , , , , , , , on December 10, 2012 by Lax Cat Creations

This ingenious upcycle post is compliments of Tom’s newly wed brother, Jon, and wife Carrie. They did an amazing job transforming this cabinet inside and out using pallets and a creating a butcher block top. I am privileged to share their creation…

before after

“Carrie and I had been looking for a project to do together and we had access to some tools that some friends let us use. We knew that we didn’t want to spend much money on the project and Carrie wanted to try to refurbish a piece of furniture. We looked in the classifieds for a cheap piece of furniture that we thought that we could improve.

I found a microwave stand that someone was selling for just 10 dollars.

First order of business was to disassemble it and see what we were working with under all the paint. Carrie thought of a design that would look good with a butcher block top and rustic look. We needed some material so we spent $7 at the ReStore on some old 2×2’s sitting in a bucket, a drawer, 2×4 that I would cut down for the face, and a nice piece of wood for the face of the drawer. We found some old pallets to use for the inside (free).

After a lot of sanding and some paint stripper we reached a solid wood body that was in great shape to reuse.

Carrie planed the 2×2’s down to size to get a hard edge for the butcher block. Then one by one we glued-and-screwed them together. For the end pieces we counter sunk the screws and capped them with dowels. After assembling the top we clamped it together and let it sit for a few days.We sanded the top from 100 to 320 grit, then we treated it with butcher block oil from Lowe’s ($12).  We applied four coats, scuff sanding with 400 grit between each coat. I’ve heard mineral oil can also work for this.

Once the face frame was cut and assembled, I disassembled the pallets and cut the slats to length.  The slats were installed on the floor of the cabinet and across the back to give it the rustic look.  We added a shelf as well.  Carrie wanted some legs for the cabinet and thought that we could use the left over pallet pieces. So we glued, clamped, and cut them to size.

We eventually found the hardware at Lowe’s ($10), despite looking at the ReStore.

After assembling the cabinet and putting the drawer in it was time for the finish. Using white spray paint, we coated the wood, though it was a hassle and took many coats. We would suggest using a spray gun or a very nice brush as this would be cheaper and more environmentally friendly. Once dry, we sanded the edges of the cabinet down to bare wood and used some old wood stain to coat the entire piece. Without allowing the stain to dry we wiped it off with an old rag. This not only stained the wood but also stained the white paint and gave it more of a cream color.

When the finish was dry, we attached the door and hardware along with the butcher block top.I tried to reuse every part of the original piece possible, but since we used a different top and left one side open we had some left over material to use for the next project.”

– Jon – Salt Lake City, UT

 
Click on photos to view gallery

I hope you find their creativity as inspiring as I do!

UPDATE:

Jon and Carrie sold this item to a couple remodeling their kitchen, making $100 in profit. They are now on the lookout for their next project. Stay tuned…

money